• Full port design
  • Simple actuation
  • On-Off throttling
  • Only 2 wetted parts
  • Broad range of materials
  • Tight shut-off, even on trapped solids


Series TU valves feature all plastic construction with double true union ends for simple and quick field service. When the union nuts are backed off, the valve may be removed for servicing without disturbing the adjacent piping.

The Series TU valves are widely used in mineral processing, where the severe service requires frequent inspection and maintenance of equipment.

Often in slurry or dry powder systems, process is interrupted by gate, globe, plug or butterfly valves that have been clogged with material. There is a solution: EVR’s Petite Pinch Valves.

Designed for easy installation, EVR’s Petite Pinch Valves can be used to effectively control viscous or abrasive material flow.

DO NOT use excessive air pressure to operate the valve. This may damage the elastomer sleeve. Always control the supply pressure with a pressure regulator.
1 - 9 of 9 | Results Per Page | View | Unit of Measure
1 

Item #

Size

Inside Diameter

Outside Diameter

Length F/F

C NPT

Work Pressure

TU-01 N/A 01 N/A 1/4 in N/A 2 1/4 in N/A 4 in N/A 1/4 in N/A 60 psi
TU-02 N/A 02 N/A 3/8 in N/A 2 5/8 in N/A 4 1/2 in N/A 3/8 in N/A 60 psi
TU-03 N/A 03 N/A 1/2 in N/A 2 5/8 in N/A 4 1/2 in N/A 1/2 in N/A 60 psi
TU-04 N/A 04 N/A 3/4 in N/A 3 in N/A 5 1/4 in N/A 3/4 in N/A 60 psi
TU-05 N/A 05 N/A 1 in N/A 3 9/16 in N/A 6 1/4 in N/A 1 in N/A 60 psi
TU-06 N/A 06 N/A 1 1/4 in N/A 4 3/4 in N/A 8 3/8 in N/A 1 1/4 in N/A 50 psi
TU-07 N/A 07 N/A 1 1/2 in N/A 4 3/4 in N/A 8 3/8 in N/A 1 1/2 in N/A 50 psi
TU-08 N/A 08 N/A 2 in N/A 6 in N/A 8 3/4 in N/A 2 in N/A 50 psi
TU-09 N/A 09 N/A 3 in N/A 6 5/8 in N/A 9-1/2 in N/A 3 in N/A 25 psi
1 - 9 of 9 | Results Per Page | View | Unit of Measure
1