• Full port design
  • Simple actuation
  • On-Off throttling
  • Only 2 wetted parts
  • Broad range of materials
  • Tight shut-off, even on trapped solids


The type MP valve features an injection molded construction and is available in a range of engineered plastics.

This valve is suited for harsh applications and the economical design is ideal for incorporation into original equipment.

Often in slurry or dry powder systems, process is interrupted by gate, globe, plug or butterfly valves that have been clogged with material. There is a solution: EVR’s Petite Pinch Valves.

Designed for easy installation, EVR’s Petite Pinch Valves can be used to effectively control viscous or abrasive material flow.

Control Inlet is 1/4" NPT Nickel-plated brass with Viton O-ring seal.

DO NOT use excessive air pressure to operate the valve. This may damage the elastomer sleeve. Always control the supply pressure with a pressure regulator.
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1 

Item #

Size

Inside Diameter

Outside Diameter

Length F/F

C NPT

Work Pressure

MP-03 N/A 03 N/A 1/2 in N/A 2.70 in N/A 4.10 in N/A 1/2 in N/A 60 psi
MP-04 N/A 04 N/A 3/4 in N/A 2.84 in N/A 4.52 in N/A 3/4 in N/A 60 psi
MP-05 N/A 05 N/A 1 in N/A 3.20 in N/A 4.60 in N/A 1 in N/A 60 psi
MP-07 N/A 07 N/A 1 1/2 in N/A 3.99 in N/A 6.24 in N/A 1 1/2 in N/A 50 psi
MP-08 N/A 08 N/A 2 in N/A 4.25 in N/A 8 in N/A 2 in N/A 50 psi
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1